Woodworking Articles

DIY dollhouse bookcase
Here is a dollhouse bookcase that I was commissioned to build for my granddaughter by her parents. It’s made from 1/2″ whitewood sanded plywood that I picked up at Lowes. It’s basically very smooth, void-free plywood with a white primer coat. The side trim and base moulding are made from 3/4″ white pine. The materials […]

Dollhouse Bookcase

This entry was posted in Projects and tagged childrens furniture dollhouse bookcase on by
Gravity defying wine holders
I decided to make an assortment of “gravity defying” wine bottle holders as Christmas gifts last year. The basic idea is an angled piece of wood with a hole in it to hold a bottle of wine in a position that seemingly defies the known laws of physics. One would think the contraption would topple […]

Gravity Defying Wine Bottle Holders

This entry was posted in Projects on by
Lubricated tablesaw worm gears
The hand cranks for raising and tilting the blade on my General cabinet table saw were getting progressively harder to turn so I decided it was time for a little maintenance. The blade tilt mechanism was particularly in dire need: not only was it difficult to turn the crank but it produced a horrible screeching […]

Table Saw Clean and Lube

This entry was posted in Safety Tools on by
This compass cutter cuts circles ranging from 3" to 15" in diameter.
While building several sets of cornhole boards, I needed a way to create an evenly-spaced painted ring around the hole. That’s when I decided to build this “compass cutter”, which is essentially an over-sized compass with a blade in place of a pencil. It’s used like a normal compass but instead of drawing a line, […]

Compass Cutter

This entry was posted in Jigs Misc on by
Portable plywood cutting table supports a full sheet of plywood
I wish I had made this plywood cutting table a long time ago. It makes quick work of breaking down a piece of plywood into more manageable sizes, especially if using a track saw. Perhaps the best feature of the table is that it is portable, allowing it to be assembled in an area with […]

Plywood Cutting Table

This entry was posted in Jigs Projects on by
Slot in bottom of track saw rail slips over the anchor block dowels
The Dewalt Track Saw has a unique advantage over other track saws: a double-sided rail – a rubber edge strip on both sides –  which allows cutting along both sides of the rail. This means there’s no need to flip the track around to cut from the opposite direction and the overall life of the […]

Dewalt Track Saw Crosscut Table

This entry was posted in Jigs on by
This simple router circle cutting jig was made from a piece of left-over 7/16″ PVC board that I found in the scrap bin.  My impetus for building it was that I needed to cut 6″ wide holes for several corn hole game sets and I decided that the manual scroll saw approach with resultant wavy edges […]

Router Circle Cutting Jig

This entry was posted in Jigs on by
The requirements for this wishing well were rather simple: it had to be relatively compact but large enough to cover an unsightly well pipe, but also inexpensive and easy to make. Of course, I also wanted it to look half-decent. I think I succeeded on all counts. The well was built over the course of a […]

Simple Wishing Well

This entry was posted in Projects on by
Here is a nifty calculator for making items via splayed joinery that was graciously provided by Gerald R. What exactly is “splayed joinery” you say? Well imagine a tube made from multiple pieces of wood (staves) in which one end of the tube is larger in diameter than the other. An example is a tapered round […]

Stave Calculator for Splayed Joinery

This entry was posted in Jigs Joinery on by
Seagull on pier intarsia
I’ve been dabbling with intarsia for the last few months and it’s been quite the learning experience. If you’re not familiar with intarsia, it refers to a woodworking technique/art form that involves inlaying different pieces of wood to create a pseudo 3-D picture. It relies on the natural variations in wood grain and color to create the […]

Getting Started with Intarsia

This entry was posted in Misc on by
Garden bench from reclaimed redwood lumber
My big project over the latter part of winter was this outdoor bench made from reclaimed redwood. The lumber for the bench came from an older, weather-beaten bench that had been exposed to the elements for 20+ years.  When I realized the bench was made from relatively expensive and rare redwood (possibly old-growth), I decided it […]

Reclaimed Redwood Bench

This entry was posted in Projects Wood on by
Epoxy is activated by mixing 2 parts resin to 1 part hardener 1
Penetrating epoxy has been used for years to seal and repair wooden parts on boats but it also has value in protecting outdoor wooden furniture from the elements. It’s designed to be applied to bare wood where it soaks into the wood, filling the small gaps in the wood surface and creating an impenetrable moisture barrier. […]

Penetrating Epoxy

This entry was posted in Finishing on by
"I can't believe I ate the whole thing..." 6
When I built this cedar bird house last year, I was hopeful that it would attract blue birds or some other colorful song birds. So I was somewhat excited to see a “bird” sticking his head out of the house as I was doing some yard work recently. But as I got closer to the house I realized the bird was […]

Frogs in the Bird House

This entry was posted in Projects on by